Forum Replies Created
-
AuthorPosts
-
in reply to: New Broadhead Regulation for PA Hunters #62569
J. Wesbrock,
When I inquired about the 3″ broadhead regulation. I found out it was enacted right around the same time cross-guns were legalized during the general archery season. It seems they were concerned nimrods would be running around the woods with cross-guns cocked and such a long broadhead would impose a more dangerous situation if he/she were to slip and fall!!!! Go figure???? Probably had something to do with the major archery and cross-gun manufacturers lobbying in Harrisburg also.
About 4 years ago the PGC changed the language on definition of a broadhead to state “Broadheads must be manufactured from Steel” meaning primitive type heads napped from stone, obsidian etc. were illegal. When I brought that to their attention it was quickly changed and was never enacted.
Steve
Joe,
Let me start off by saying I am NO EXPERT by any means but I have spent considerable time (and unfortunately money) trying to find that perfect Ashby inspired UEFOC arrow for my hunting applications which mostly include black bear and white tail deer.
I have tuned 5 different bows with UEFOC arrows and just finished tuning a Dyrad recurve last week. I have made some observations through trial and error but they mainly apply to short draw lengths. Some may agree and some may disagree but this is what I have found to be true for me. First: once you start cutting carbon arrows shorter than 28 inches they become very stiff in spine. The difference between 29″ and 27 1/2″ drastically increases spine. Much more than say 31 1/2″ down to 30″. Second: bows that are cut 3/16″ up to 5/16″ past center do not shoot small diameter (9/32″ and smaller) EFOC & UEFOC shafts very well and the tuning process can be very frustrating. I fix this issue by building out the riser to at least center shot and most of the time 1/8″ to 3/16 of an inch past center. Third: The longer the arrow stays with the string the stiffer an arrow needs to be. An example would be a 30″ draw length as opposed to a 26″ draw length shooting the same poundage at that given draw length. Even if they both shot 31″ arrows I’ve found the person shooting the longer draw length needs a stiffer arrow.
With that being said here’s my set-up.
Bow Type and Make: Dyrad Orion Recurve
Bow Length: 56″
Bow Weight @ 28″: 54#
My Draw Length: 50# @ 26″
Arrow Type: Carbon Easton Bloodline 480 (9/32″) Dia
Arrow Length: 27 3/8
Feathers Number and Length: 4 A&A RW Straight Fletch 2 1/2″
Insert Weight: 75 grains
Adapter Weight: 100 grains
Point Weight: 225 grains
Footing Weight: 30 grains
Total Arrow Weight: 647 grains
FOC: 33.1%
I might also add that I shoot a high performance SBD 10 strand string. I don’t think many people get to experience just how stiff carbon arrows get when cot under 28″ simply because they need a longer arrow for their actual draw length. I have tuned stiffer arrows to my set-ups but always had to leave the arrows 29″ to 30 1/2″. I just don’t like having 3 1/2″ of arrow and 3″ of broadhead hanging off my shelf when I can get away with less spine and a shorter arrow. Hopes this helps.
Steve
in reply to: Is your traditional bow "Cute"? #58299Jim, It does my heart good to here that at least some beginners are being introduced to traditional archery. The shame of it is that most kids won’t ever get the exposure. All they will ever know is wheels and gadgets. I too feel sorry for the kids.
Steve
in reply to: August/September TBM #56935As usual, TBM is the best hunting publication on the market. I must say Krista’s Campfire Philosopher article is the best I’ve read since the two Dave’s stopped writing the column. Like she said and I quote ” Life is so short. Go hunt”. I also enjoyed Doug Borland’s article. He’s been on adventures that most of us only dream of doing.
Steve
in reply to: Paint instead of wraps? #62627Super glue gel works well with paint, wraps and carbon in my experience. I use the locktite gel and it has never failed no matter what the surface. Good luck and yes you are correct this is a great site for very useful information.
Steve
in reply to: Short recurves…suggestions? #34708Jim, I own a Black Mountain Sheepeater Obsidian recurve that was made by Dyrad Bows. It’s a static recurve that measures 46″ strung. I don’t think Dyrad is building them anymore but believe they are still being produced. Not sure who’s building them now. The original model had a longbow style grip but the more recent models are made with a pistol-recurve style grip. Blackie did a review on them a few years back in TBM. Maybe a search will produce more information. The bow draws smooth out to 30″ and shoots a heavy arrow with authority. Great shooting bow and light as a feather.
Steve
in reply to: Caroline & David Petersen #30118When I saw this post it brought a tear to my eye. Three and a half years ago at the age of 47 ( the day before the opening day of archery season here in PA) my wife was killed in a tragic accident on her way to work. She meant the world to me. I felt my life was shattered. I sent an e-mail to Dave months later and he most graciously responded with a heartfelt inspirational message that I will never forget. For that I am so grateful. (Dave didn’t even know who I was) but took the time to respond. I am a big fan of his books, articles and philosophy on life. He mentioned that one day (because of Caroline’s health issues) he was bound to face the same reality I was up against. I pray that he will have the same strength he inspired in me to continue living life to the fullest. Dave is a great person I admire very much and wish the best of luck to him.
Steve
in reply to: Caroline & David Petersen #29920Prayers sent. Stay strong.
in reply to: poll on release #31901Started out split finger. Shot that way for 20 years then had a serious hand injury in 07 that required microscopic tendon surgery. After 6 months of healing and therapy split finger just didn’t feel comfortable, so I tried 3 under. My accuracy seemed to improve a little so I stuck with it. Just last year went back to split finger but I changed my anchor point to middle finger at corner of mouth to bring the arrow to the same position as 3 under. My bows are much quieter shooting split finger.
in reply to: Best way to tune for wood arrows? #12998R2,
Joe at Tuffheads carries 190, 225, & 300 grain field points. 3 Rivers has 100 to 190 grain glue on field points in 11/32. As far as the original question about tuning wooden shafts, take Troy’s advice. He is a fountain of information.
Steve
in reply to: Does short drawing a bow effect its performance #50369No. Most bows are marked for a 28″ draw as a standard.
in reply to: A selfbow for Molly #50365Great looking bow!!! There’s just something about cutting your own stave and making a functional bow from it. Hope your wife enjoys shooting it.
Steve
in reply to: Custom handmade broadheads! #45831Good luck…. Does sound like a good winter project. I’ve made my own bows, strings, and arrows but never attempted broadheads. Interested in your results.
Steve
in reply to: Happy BD Dr. Ed! #45823Happy belated Birthday to you Dr. Ed. Your unselfish work is greatly appreciated. Sounds like you enjoyed your day.
Steve
-
AuthorPosts
