Forum Replies Created

Viewing 15 posts - 1,516 through 1,530 (of 2,180 total)
  • Author
    Posts
  • David Coulter
    Member
      Post count: 2293
      in reply to: 2013 hunting rigs #55376

      For me, same set-up as last year. Yep, same ol’ boring thing, except that I think I’m shooting it better. I’m pretty convinced I’m a one-bow guy for quite a while anyway.

      Leon Stewart Slammer Special R/D Longbow, 46# @ 28. Beman ICS Bowhunter 400s, cut just under 30″ with 50 grain brass inserts, 75 grain steel adapters and 225 grain Tuffheads for a total of 625 grain. I’m using 2 1/2 x 4 straight fletch and I’m getting about 28% FOC.

      I have 300 grain field tips and built up stumpers with 100 grain inserts and 100 grain adapters and 135 grain (give or take) Judos.

      Waiting, waiting… dwc

      David Coulter
      Member
        Post count: 2293

        Clay,

        I have watched a few of your videos and read some of your comments on this site. I think you’re making a better leader than a follower. I’m sure you have more to offer already than can be packed into that sort of class.

        Keep the good stuff coming. dwc

        David Coulter
        Member
          Post count: 2293

          It seems like there were some cheap knives made in Pakistan going around for a while. I never ventured near one, but was wondering just how bad are they? dwc

          David Coulter
          Member
            Post count: 2293

            Some great times. Good idea for a thread Smithy. You have some beautiful country to hunt. We don’t open here in PA until Oct. 5, except for a few southern areas.

            There’s a quote in a movie, All That Jazz, I believe, from years ago. The quote was by a circus performer who said something to the effect of, Life is on the wire, the rest is waiting. In one aspect of my life, it’s either deer season or getting ready for deer season. dwc

            David Coulter
            Member
              Post count: 2293
              in reply to: A first harvest… #53074

              Terrific! Congratulation, david

              David Coulter
              Member
                Post count: 2293

                Try to copy the link and paste it here. I want to take a look at this. thanks, dwc

                David Coulter
                Member
                  Post count: 2293
                  in reply to: Wild Shots #42969

                  For the most part, my bad shots are much closer to my good shots, but I had a doozy last week. First shot of the morning and it went crazy. Missed the bale completely and went through the weeds and grass. I still haven’t had the heart to go looking for it. I’m convinced I’ll need a shovel for this one. dwc

                  David Coulter
                  Member
                    Post count: 2293
                    in reply to: Topics #42878

                    That’s exactly why we need more women in places of power… oops! I just can’t help but get political!! Thanks for your good words, Robin. dwc

                    David Coulter
                    Member
                      Post count: 2293
                      in reply to: Carbon arrow saw #42877

                      That file method sounds like the one to try. I use a simple cut off wheel on a dremel. I measure and mark the shaft with a sharpie and then cut it just a bit long. Spinning the shaft slowly in my fingers I butt the shaft into the dremel to make a nice square end at the proper length. It’s been working fine for me for a few years now. dwc

                      David Coulter
                      Member
                        Post count: 2293
                        in reply to: Wild Voices #40040

                        Whose quote is it? I can’t imagine a day without crows. Yesterday, coming home from the early morning dog walk/stumping session, a few crows hollered our arrive back home. Later that afternoon, during an afternoon wedding, a crow called and swooped down the ridge behind the ceremony. That moment was as sacred as any for me. You can always count on crows when nothing else will lend a sound. dwc

                        David Coulter
                        Member
                          Post count: 2293
                          in reply to: Good luck! #38588

                          Yes, good luck and safety to all and good meals to follow! peace, dwc

                          David Coulter
                          Member
                            Post count: 2293
                            in reply to: Celebration #38585

                            This is a good thread. I appreciate your posts, all of you. For me, it simple. A few minutes to feel what’s in my heart and how privileged I am to have the time in the woods. It’s time to take it all in, again, just I was before the kill, but different. dwc

                            David Coulter
                            Member
                            Member
                              Post count: 2293
                              in reply to: High FOC stability #37418

                              I’ve been to the edge of the Earth myself. dc

                              David Coulter
                              Member
                                Post count: 2293

                                See if you can ring up Troy on this issue. He was a great help for me when I went high FOC. dwc

                                David Coulter
                                Member
                                Member
                                  Post count: 2293
                                  in reply to: High FOC stability #36453

                                  Yes, it’s pretty cool. I’ve seen it happen on smaller impacts, but nothing like this one. I cut a small Hemlock branch off once and arrow went on to hit the mark I was going for. This one was like slow motion. I wish I had it on video, too. thanks, d

                                Viewing 15 posts - 1,516 through 1,530 (of 2,180 total)