[nemoshooter]

in reply to: recommendations for a recurve #32174

[quote=TBMADMIN]Hi Nemoshooter, and welcome to the site! I’m sure someone more knowledgable than I will chime in, but they also need your draw length to estimate arrow spine. We did an excerpt from T.J.’s book, The Traditional Bowhunter’s Handbook, about Wood Arrow Spine if that helps at all. You might also search the older forum posts. This has been discussed in the past. If you need any help, just send me an email or PM.[/quote

going by the general rule of thumb, if my draw length is 29″ plus a loop with a compound, then i figure that my dl with a recurve would right at 28″

[nemoshooter]

in reply to: recommendations for a recurve #31791

I have some old simmons interceptor broadheads, 190 grains. If i went with say a 50# recurve want would be a good arrow spine. I would shoot carbons anyway. i thought maybe a 340 spine arrow cut at, say 31″. I am just wanting to get a baseline, so to speak.

[nemoshooter]

in reply to: recommendations for a recurve #31772

have any of you had experience with the samick recurves? i read in field and stream in an article by E. Donnall thomas (SP?) that the samick was a good quality and wouldn’t cost you an arm and a leg, and would yield a lot of shooting for years.

[Author]

Posts