Seemingly no fibers sticking up. Thanks for solution. Any particular brand of rub on poly?
Thanks, again,
P.
Steve Graf wrote: If it is nicked on the edge, that’s the area that needs to be addressed carefully. If it were me, I’d give it a light sanding to make sure there are no fibers lifting up. Then I’d apply a series of drops of super glue till it was built back up to the original level. Then, if needed, I’d apply a little rub on poly to match the rest of the bow as best as possible.
Or I might not even sand it. I might just apply a few coats of super glue and forget it. The glass is tough, and any bow that gets used is going to get dinged up.
