My Stumping/Small Game Head

[Stix]

#2372

Just a wingnut placed backwards in back of a fields tip. They weight about 85 grains. adjust your field tip weight accordingly.

You can skip the field point and use an 8-32 flathead screw to use as a blunt. just add 8-32 nuts on the screw in front of the wingnut to increase weight.

[David Coulter]

#9028

I love it. Simple, looks like it would work well enough. dwc

[Fallguy]

#9511

Stix wrote: Just a wingnut placed backwards in back of a fields tip. They weight about 85 grains. adjust your field tip weight accordingly.

You can skip the field point and use an 8-32 flathead screw to use as a blunt. just add 8-32 nuts on the screw in front of the wingnut to increase weight.

Have you tried to sharpen the ears on the wing nut? I am thinking I can get my ACE hex head up to 300 grains to match my Tuff heads.

[Stix]

#9536

No,I haven’t tried sharpening the ears, but I have tried putting the bottoms to a grinder to take off material to lower weight. ie: wingnuts weigh 85 grains, used 85 grain field tips.(170 grain total) Ground bottom of wingnut so that entire weight of both is 150 grains to match normal field tip weight.

[jczieske]

#9974

I am going to try that! Thanks

[WyoStillhunter]

#11302

Great idea: simple, cheap, doable!

[Author]

Posts