Home › Forums › Bows and Equipment › long bow switch

Viewing 3 reply threads
  • Author
    Posts
    • indigo
        June 9, 2009 at 3:31 am
        Post count: 2
        #6419

        :?hello trad bowhunters, i recently switch from using a martin x-200 recurve to using a OMP 68″ 60# Adrondack Hunter longbow my brace height is 7 1/4 . i like the way it shoots, but im getting different brace heights, from different sights,so would someone please tell me the correct brace height

      • Voodoo
          June 10, 2009 at 11:46 am
          Post count: 50
          #52458

          Indigo, every bow has a sweet spot, and every bow is different, recommended brace height is a guide to get you into the ball park, final determination is up to you based on your arrows and how you shoot your bow….. don’t be afraid to experiment a little with your Brace height to find your sweet spot…. it will be time well spent….Steve

        • rchery59
            June 10, 2009 at 9:36 pm
            Post count: 5
            #52915

            Shoot the lowest brace hieght you can while keeping good arrow flight and no noise. It takes some playing around but it’s worth it.

          • indigo
              June 14, 2009 at 2:37 am
              Post count: 2
              #56487

              Voodoo wrote: Indigo, every bow has a sweet spot, and every bow is different, recommended brace height is a guide to get you into the ball park, final determination is up to you based on your arrows and how you shoot your bow….. don’t be afraid to experiment a little with your Brace height to find your sweet spot…. it will be time well spent….Steve

              thank you steve i will give it a try always was afraid of splitting limbs.:D

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.