Bowsocks ??

[archer38]

#3523

Anyone ever use bowsocks? I’ve been trying to find a way to camo my bow a bit without actually “sticking” something to it.

I was told by another trad hunter to stretch panty-hose over my limbs but I tend to think that might effect the way it shoots. I saw an ad for Bowsocks and wondered how well they work!

[WyoStillhunter]

#20950

I have a very shiny Browning Explorer from the early 1970s and used to have some camo bow sleeves on it back then. They did not effect bow performance at all. I had to tape each end of both sleeves to keep them in place. Otherwise they would slip and bunch up. I used electrician tape for that.

I think panty hose or stockings would work to cut glare but might catch on all sorts of twigs, weeds, etc. Sleeves off an old plaid shirt (flannel?) could be sewn up to fit snugly but would still need to be anchored at the riser to keep from bunching up.

Good luck with the project.

[Robin Conrads]

#21421

R2 did a great Tip of the Week on using camo tape on the limbs. Here’s the link. I think you can even get this tape in camo pattern, and someone suggested a veterinarian’s office might carry it. Or you can paint it yourself, but the tape only sticks to itself and leaves very little residue on the bow, which cleans up easily if you decide to remove it. I hope that helps.

[Toehead]

#21434

I use the spandex ones from ABS. Work great and pretext your limb finish as well. No performance difference I can see.

[William Warren]

#21506

I like those limb skins from 3Rivers. These are the tamarack pattern. I have the snakeskin too but like the tamarack the best

[paleoman]

#21677

I found a bow quiver using the rubber tension bands will slide with the limbskins. I ended up putting a light coat of camo paint on my Bear Grizzly after much internal debate.

[Wexbow]

#21694

I’ve used the alaska bowhunting camo socks from 3 rivers when i had a nasty set of white limbs on my takedown. Didn’t notice any difference in performance and they certainly looked good. Only reason i don’t use them anymore is because i have matt black limbs now.

[Ralph]

#21756

Here ya go!!! Simple, my art work but I think it can be purchased in camo now. Bet it ain’t as inexpensive (cheap :D). Cleans easily and if your a bit careful it can be reused.

[lyagooshka]

#22024

I’m not sure if this is what R2 was referring to in his tip, but you can go to the drug store and pick up some Coban. It is self adhesive, meaning it sticks to itself, not whatever you are wrapping. I have seen rolls of the stuff in sporting goods stores in camo pattern but at more than twice the cost. I would just wrap a layer on your limbs and riser and give it a try. If it works, use a marker to make your own pattern. Some spots or stripes should do the trick. One thing you should remember is that if you hunt in the rain, you will want to unwrap the Coban as it will retain moisture. Hope this helps.

Alex

😀

[rwbowman]

#22346

Duncan wrote: I like those limb skins from 3Rivers. These are the tamarack pattern. I have the snakeskin too but like the tamarack the best

+1 on the Limb Skins from 3Rivers. They are awesome and do not negatively affect the bow one bit.

[woodchuck]

#22620

Tractor Supply Company carries camo Coban for use on horses. Get 4 4″ rolls for around $7. More than enough for wrapping several bows. Stickes very well to itself, leaves no residue on limbs, and does not affect shooting. Drawback is the smell, not sure why this smells so bad, but leave it outside (under cover of course) for a few days and the smell goes away. Here’s the link :http://www.tractorsupply.com/powerflex-reg-value-pack-woodland-camo-pack-of-4-1014732

If you don’t have a tractor supply around, might check similar type stores

[David Petersen]

#22641

I use ABS skins on my Osage selfbow (got them at a door prize at a tradbow event some years ago). This bow has real rattler skins on the back but the finish is very shiny. The skins, with large scales, prevent use of paint or anything with sticky like camo tape. I’ve had no problems with bow-quiver slippage. I prefer not to use skins, but in some cases they are all that’s workable … and so far as cutting glare and visibility nothing works better than cloth. I tried some tape camo a few years ago but it was as shiny as the bow, so I saw no point. It is glare we need to cut on our bows, first and foremost.

Five days and counting!

[Raymond Coffman]

#23153

I use the Camo Form by “Mcnett”, great stuff -does not stick to bow- non reflective. It can be found at some of the big retailers [ sportsman’s warehouse etc]or on the internet. it is the Camo form of the med Bandages [coban- self adhesive]used today. It does not effect the bow’s cast and one can put a strap on Bow Quiver over it [ which will not move].It is pricey – but lasts over a year+. No scent on the above company’s product.

Scout

[archer38]

#24299

Thanks everyone for the great tips and advice. I’ll let you know how it works out.

[Author]

Posts